Mold, Testing, and Remediation

Basics on mold

Mold is found indoors and outdoors in all climates and during all seasons. It survives outdoors by using plants and decaying organic matter as a source of nutrition.

Indoors, molds need moisture and a carbon source from building materials to grow. Excess moisture is generally the major cause of indoor mold growth.

Molds reproduce by releasing spores in the air until landing in other locations. When they settle on wet or moist surfaces, they can form new mold colonies. The types of molds found in indoor spaces are not rare or unusual.

No indoor space is completely free from mold spores. Molds are everywhere. This makes exposure unavoidable, whether indoors or outdoors, at home or at work.

Toxic mold

Certain molds are toxigenic, meaning they can produce toxins (mycotoxins). However, the molds themselves are not toxic or poisonous. Molds that produce mycotoxins, like Stachybotrys chartarum, should be considered the same as other molds that can grow in your house or workplace.

Any mold growing in buildings indicates a problem with water or moisture and should be immediately addressed. For further information on Stachybotrys chartarum, go to CDC's webpage Facts about Stachybotrys chartarum.

Environmental testing

There are no health-based standards for mold or other biological agents in indoor air. We do not recommend routine air sampling for mold with building air quality evaluations.

In many cases, very short-term sampling for mold spores is performed. However, the results, especially negative findings of mold, may not represent actual exposures.

Spore counts and culture results (colony forming units) are often included in indoor air quality reports. These do not capture the full range of exposures. Therefore, measured mold concentrations in spore counts or colony forming units with short-term air samples cannot be interpreted in relation to health risks.

What building occupants react to is unknown. It may be:

• Mold
• A compound produced by mold
• Something related to bacteria
• Compounds from building materials released into the air

NIOSH has found thorough visual inspections or detecting problems by musty odors are more reliable than air sampling. To help assess for dampness, NIOSH developed the Dampness and Mold Assessment Tool (DMAT) for schools and general buildings:

• School Buildings Form & Instructions
• General Buildings From & Instructions

Remediation

Appropriate remediation includes:

-Drying wetted materials within 48 hours of getting wet or remove the materials.

-Making necessary repairs to prevent further water entry into the building.

-Following appropriate remediation guidelines with proper containment when identifying mold on materials. Inappropriate remediation (e.g., painting over water-damaged materials or moldy surfaces) can cause further problems.

-Monitor areas using the NIOSH Dampness and Mold Assessment Tool to ensure repairs and remedial actions are effective.

For more about remediation, go to the New York City Department of Health and Hygiene's Guidelines on Assessment and Remediation of Fungi in Indoor Environments.